H3C Technologies H3C MSR 5600 - Manual (Page 124)

111
Security model
Security model
keyword for the group
Security key settings
for the user
Remarks
No authentication, no
privacy Neither authentication
nor privacy
None
The authentication and
privacy keys, if
configured, do not take
effect.
To configure SNMPv3 basic parameters:
Step Command Remarks
1. Enter system view. system-view N/A
2. (Optional.) Enable the SNMP
agent.
snmp-agent
By default, the SNMP agent is
disabled.
The SNMP agent is enabled
when you perform any command
that begins with snmp-agent
except for the snmp-agent
calculate-password command.
3. (Optional.) Configure the
system contact. snmp-agent sys-info contact
sys-contact The default is Hangzhou H3C
Tech. Co., Ltd.
4. (Optional.) Configure the
system location. snmp-agent sys-info location
sys-location
The default is Hangzhou, China.
5. Enable SNMPv3.
snmp-agent sys-info version { all |
{ v1 | v2c | v3 }* }
The default is SNMPv3.
6. (Optional.) Change the local
engine ID. snmp-agent local-engineid
engineid
By default, the local engine ID is
the company ID plus the device
ID.
IMPORTANT:
After you change the local engine
ID, the existing SNMPv3 users and
encrypted keys become invalid,
and you must re-configure them.
7. (Optional.) Configure a remote
engine ID.
snmp-agent remote { ip-address |
ipv6 ipv6-address } [ vpn-instance
vpn-instance-name ] engineid
engineid
By default, no remote engine ID is
configured.
To send informs to an SNMPv3
NMS, you must configure the
SNMP engine ID of the NMS.