beautypg.com

Configuring netstream, Overview, Netstream basic concepts – H3C Technologies H3C MSR 5600 User Manual

Page 190: Flow, Netstream operation

background image

177

Configuring NetStream

Overview

Conventional ways to collect traffic statistics, like SNMP and port mirroring, cannot provide precise

network management because of inflexible statistical methods or the high cost of required dedicated
servers. This calls for a new technology to collect traffic statistics.
NetStream provides the statistics of network traffic flows, and it can be deployed on access, distribution,

and core layers.
NetStream implements the following features:

Accounting and billing—NetStream provides fine-gained data about network usage based on

resources such as lines, bandwidth, and time periods. The ISPs can use the data for flexible billing
based on the time period, bandwidth usage, application usage, and QoS. Enterprise customers

can use this information for department chargeback or for cost allocation.

Network planning—NetStream data provides key information, such as the AS traffic information,
for optimizing the network design and planning. This helps maximize the network performance and

reliability, and minimize the network operation cost. For more information about the AS, see Layer
3—IP Routing Configuration Guide
.

Network monitoring—Configured on the Internet interface, NetStream allows for monitoring traffic
and bandwidth utilization in real time. Based on this information, administrators can understand

how the network is used and where the bottleneck is, so they can better plan the resource

allocation.

User monitoring and analysis—NetStream data provides detailed information about network
resources and application resources. This information helps network administrators efficiently plan
and allocate network resources, which helps ensure network security.

NetStream basic concepts

Flow

NetStream is an accounting technology that provides statistics on a per-flow basis. An IPv4 flow is

defined by the following 7-tuple elements: destination IP address, source IP address, destination port

number, source port number, protocol number, ToS, and inbound or outbound interface. The 7-tuple

elements define a unique flow.

NetStream operation

A typical NetStream system includes the following parts:

NetStream data exporter—The NDE classifies traffic flows by using the 7-tuple elements, collects

necessary data from the target flows, and exports the data to the NSC. Before exporting data, the
NDE might perform processes on the data, such as aggregation. A device with NetStream

configured acts as an NDE.

This manual is related to the following products: