H3C Technologies H3C MSR 5600 - Manual (Page 200)

187
Step Command Remarks
3. Configure forced
aging of the
NetStream entries.
4. Set the maximum entries that the cache can
accommodate:
ip netstream max-entry max-entries
5. Exit to user view:
quit
Use either method.
By default, the cache can
accommodate up to 10000
entries.
Age out and export NetStream data, and clear
the cache:
reset ip netstream statistics
Configuring the NetStream data export
Configuring the NetStream traditional data export
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure the destination
address and destination
UDP port number for the
NetStream traditional data
export.
ip netstream export host
ip-address udp-port [ vpn-instance
vpn-instance-name ]
By default, no destination address or
destination UDP port number is
configured, so the NetStream
traditional data is not exported.
3. (Optional.) Configure the
source interface for the
NetStream traditional data
export.
ip netstream export source
interface interface-type
interface-number
By default, the interface where the
NetStream data is sent out (the
interface connects to the NetStream
server) is used as the source interface.
4. (Optional.) Limit the data
export rate.
ip netstream export rate rate
By default, the data export rate is not
limited.
Configuring the NetStream aggregation data export
Configuration restrictions and guidelines
Configurations in NetStream aggregation view apply to only the NetStream aggregation data export,
and those in system view apply to the NetStream traditional data export. If configurations in NetStream
aggregation view are not provided, the configurations in system view apply to the NetStream
aggregation data export.
If the version 5 format is configured to export NetStream data, NetStream aggregation data export uses
the version 8 format.
Configuration procedure
To configure the NetStream aggregation data export: