Configuration procedure, History group configuration example, Network requirements – H3C Technologies H3C MSR 5600 User Manual
Page 138
125
Figure 46 Network diagram
Configuration procedure
# Create an RMON Ethernet statistics entry for Ethernet 1/1.
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for Ethernet 1/1.
EtherStatsEntry 1 owned by user1 is VALID.
Interface : Ethernet1/1
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Incoming packets by size:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# Get the traffic statistics from the NMS through SNMP. (Details not shown.)
History group configuration example
Network requirements
Create an RMON history control entry on the device in
to sample traffic statistics for Ethernet
1/1 every one minute.
Figure 47 Network diagram