beautypg.com

H3C Technologies H3C MSR 5600 User Manual

Page 85

background image

72

Step Command

Remarks

3.

Configure an NTP

authentication key.

ntp-service authentication-keyid
keyid authentication-mode md5
{ cipher | simple } value

By default, no NTP authentication
key is configured.

4.

Configure the key as a trusted
key.

ntp-service reliable

authentication-keyid keyid

By default, no authentication key is
configured as a trusted key.

5.

Associate the specified key

with a passive peer.

Associate the specified key with

a passive peer:

ntp-service unicast-peer

{ ip-address | peer-name }
[ vpn-instance

vpn-instance-name ]

authentication-keyid keyid

Associate the specified key with

a passive peer:

ntp-service ipv6 unicast-peer
{ ipv6-address | peer-name }

[ vpn-instance

vpn-instance-name ]
authentication-keyid keyid

By default, no passive peer is
specified.

To configure NTP authentication for a passive peer:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enable NTP authentication.

ntp-service authentication enable

By default, NTP authentication is
disabled.

3.

Configure an NTP
authentication key.

ntp-service authentication-keyid
keyid authentication-mode md5

{ cipher | simple } value

By default, no NTP authentication
key is configured.

4.

Configure the key as a trusted

key.

ntp-service reliable
authentication-keyid keyid

By default, no authentication key is
configured as a trusted key.

NTP authentication results differ when different configurations are performed on active peer and passive

peer. For more information, see

Table 4

. (N/A in the table means that whether the configuration is

performed does not make any difference.)

Table 4 NTP authentication results

Active peer Passive

peer

Authentication result

Enable

NTP

authentic

ation

Configure a

key and

configure it

as a trusted

key

Associate the

key with an

passive peer

Enable NTP

authentication

Configure a

key and

configure it as

a trusted key

Stratum level of the active and passive peers is not considered.

Yes Yes Yes

Yes

Yes

Succeeded. NTP
messages can be sent

and received correctly.

This manual is related to the following products: