H3C Technologies H3C MSR 5600 - Manual (Page 218)

205
Timestamp
parameters
Description Example
none
No timestamp is included.
All logs support this parameter.
% Sysname FTPD/5/FTPD_LOGIN: User
ftp (192.168.1.23) has logged in
successfully.
No timestamp is included.
no-year-date
Current date and time without year
information, in the format of MMM DD
hh:mm:ss:xxx.
Only logs that are sent to a log host support
this parameter.
<189>May 30 06:44:22
Sysname %%10FTPD/5/FTPD_LOGIN(l):
User ftp (192.168.1.23) has logged in
successfully.
May 30 06:44:22 is a timestamp in the
no-year-date format.
FIPS compliance
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
Information center configuration task list
Task at a glance
Perform at least one of the following tasks:
• Outputting logs to the console
• Outputting logs to the monitor terminal
• Outputting logs to a log host
• Outputting logs to the log buffer
• Saving logs to a log file
(Optional.) Managing security logs
(Optional.) Saving diagnostic logs to a diagnostic log file
(Optional.) Enabling synchronous information output
(Optional.) Enabling duplicate log suppression
(Optional.) Disabling an interface from generating link up or link down logs
Outputting logs to the console
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the information center. info-center enable
By default, the information center is
enabled.