H3C Technologies H3C MSR 5600 - Manual (Page 137)

124
Step Command Remarks
2. (Optional.) Create an
event entry in the event
table.
rmon event entry-number [ description string ] { log |
log-trap security-string | none | trap security-string }
[ owner text ] By default, the RMON
event table does not
contain entries.
3. Create an entry in the
alarm table or private
alarm table.
• Create an entry in the alarm table:
rmon alarm entry-number alarm-variable
sampling-interval { absolute | delta }
[ startup-alarm { falling | rising | rising-falling } ]
rising-threshold threshold-value1 event-entry1
falling-threshold threshold-value2 event-entry2
[ owner text ]
• Create an entry in the private alarm table:
rmon prialarm entry-number prialarm-formula
prialarm-des sampling-interval { absolute | delta }
[ startup-alarm { falling | rising | rising-falling } ]
rising-threshold threshold-value1 event-entry1
falling-threshold threshold-value2 event-entry2
entrytype { forever | cycle cycle-period } [ owner
text ]
By default, the RMON
alarm table and the
private alarm table do
not contain entries.
You can associate an
alarm with an event
that has not been
created yet, but the
alarm will trigger the
event only after the
event is created.
Displaying and maintaining RMON settings
Execute display commands in any view.
Task Command
Display RMON statistics. display rmon statistics [ interface-type interface-number]
Display RMON history control
entries and history samples.
display rmon history [ interface-type interface-number ]
Display RMON alarm entries. display rmon alarm [ entry-number ]
Display RMON private alarm
entries.
display rmon prialarm [ entry-number ]
Display RMON event entries. display rmon event [ entry-number ]
Display log information for
event entries.
display rmon eventlog [ entry-number ]
Ethernet statistics group configuration example
Network requirements
Create an RMON Ethernet statistics entry on the device in Figure 46 to gather cumulative traffic statistics
for Ethernet 1/1.