All-module configuration data retrieval example, Network requirements, Configuration procedure – H3C Technologies H3C MSR 5600 User Manual
Page 154
141
Default operation when an error occurs
Specify the module name, submodule name, table name, and column name
After receiving the edit-config request, the device returns a response in the following format if the
operation is successful:
# Perform the get operation to verify that the current value of the parameter is the same as the value
specified through the edit-config operation. (Details not shown.)
All-module configuration data retrieval example
Network requirements
Retrieve configuration data for all modules.
Configuration procedure
# Enter XML view.
# Exchange capabilities.
urn:ietf:params:netconf:base:1.0
# Retrieve configuration data for all modules.
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">