Displaying and maintaining port mirroring, Local port mirroring configuration example, Network requirements – H3C Technologies H3C MSR 5600 User Manual
Page 185
172
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure the monitor port for
the specified local mirroring
group.
mirroring-group group-id
monitor-port interface-type
interface-number
By default, no monitor port is
configured for a local mirroring
group.
To configure the monitor port in interface view:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Configure the port as the
monitor port for the specified
mirroring group.
mirroring-group group-id
monitor-port
By default, a port does not serve as
the monitor port for any local
mirroring group.
Displaying and maintaining port mirroring
Execute display commands in any view.
Task Command
Display mirroring group information.
display mirroring-group { group-id | all | local }
Local port mirroring configuration example
Network requirements
As shown in
, configure local port mirroring in source port mode to enable the server to monitor
the bidirectional traffic of the marketing department and the technical department.