H3C Technologies H3C MSR 5600 - Manual (Page 160)

147
Loading the configuration
After you perform the load operation, the loaded configurations are merged into the current
configuration: New configurations are directly loaded, and the configurations that already exist in the
current configuration are replaced by those loaded from the configuration file.
# Copy the following text to the client to load a configuration file for the device:
Specify the configuration file name
The specified configuration file name must start with the storage media name and end with the extension
(.cfg).
After receiving the load request, the device returns a response in the following format if the load
operation is successful:
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
Example for saving the configuration
Network requirements
Save the current configuration to the configuration file my_config.cfg.
Configuration procedure
# Enter XML view.
xml
# Exchange capabilities.
urn:ietf:params:netconf:base:1.0
# Save the configuration of the device to the configuration file my_config.cfg.
my_config.cfg