H3C Technologies H3C S7500E Series Switches - Manual (Page 69)

4-16
To do… Use the command… Remarks
Enter system view system-view —
Enter ONU port view interface onu interface-number —
Test the cable connected to an
UNI port
uni uni-number virtual-cable-test Required
Deregistering an ONU
After being deregistered, an ONU will try to register again.
Follow these steps to deregister an ONU:
To do... Use the command... Remarks
Enter system view system-view —
Enter ONU port view interface onu interface-number —
Deregister the ONU deregister onu Required
Updating ONUs
Introduction to ONU update
Updating ONUs means updating ONU software versions remotely through OLTs.
Updating ONU devices requires a large amount of work because, in an EPON system, there are
different types of ONU devices, which use different update files. To improve the ONU update efficiency
and reduce resources consumed by issuing commands to each ONU, the S7500E switches support
batch updating of ONUs by type and OLT port, besides updating of a single ONU. Updating ONUs by
type is recommended because it is efficient and easy-to-use. For the descriptions on the three ONU
update methods, refer to
Table 4-3 .