H3C Technologies H3C S7500E Series Switches - Manual (Page 291)

21-8
To do... Use the command... Remarks
Create a QoS policy and enter
QoS policy view
qos policy policy-name Required
Associate the class with the
behavior to map the CVLAN to the
SVLAN
classifier tcl-name behavior behavior-name
Required
Repeat these steps to
create other
CVLAN-to-SVLAN
mappings.
Configuring a downlink policy
Follow these steps to configure a downlink policy to map SVLANs back to CVLANs:
To do... Use the command... Remarks
Enter system view system-view —
Create a class and enter class
view
traffic classifier tcl-name [ operator { and |
or } ]
Configure an SVLAN as the match
criterion
if-match service-vlan-id vlan-id
Return to system view quit
Required
Repeat these steps to
configure one class
for each SVLAN.
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name
Configure a CVLAN marking
action
remark customer-vlan-id vlan-id
Return to system view quit
Required
Repeat these steps to
configure a behavior
for each CVLAN.
Create a QoS policy and enter
QoS policy view
qos policy policy-name Required
Associate the class with the
behavior to map the SVLAN to the
CVLAN
classifier tcl-name behavior behavior-name
Required
Repeat these steps to
create other
CVLAN-to-SVLAN
mappings.
Configuring the customer-side port
Follow these steps to configure the customer-side port:
To do... Use the command... Remarks
Enter system view system-view —