H3C Technologies H3C S7500E Series Switches - Manual (Page 297)

21-14
To do... Use the command... Remarks
Create a class and enter class
view
traffic classifier tcl-name
[ operator { and | or } ]
Required
Configure CVLAN match criteria
if-match customer-vlan-id
{ vlan-id-list | vlan-id1 to vlan-id2 }
Required
Return to system view quit Required
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name
Add a VLAN nest action to insert
an outer VLAN tag into the
incoming packets from the CVLAN
or CVLANs
nest top-most vlan-id vlan-id
Return to system view quit
Required
Repeat these steps to configure
one behavior for each SVLAN.
Create a QoS policy and enter
QoS policy view
qos policy policy-name Required
Associate the class with the
behavior
classifier tcl-name behavior
behavior-name
Required
Repeat this step to create
class-behavior associations for
other CVLANs.
Configuring the customer-side port
Follow these steps to configure the customer-side port:
To do... Use the command... Remarks
Enter system view system-view —
Enter Ethernet interface view
interface interface-type
interface-number
—
Configure the port as a hybrid port port link-type hybrid
Required
The default link type of an
Ethernet port is access.
Assign the port to the SVLANs as an
untagged member
port hybrid vlan vlan-id-list
untagged
Required
By default, a hybrid port is
in only VLAN 1.
Enable basic QinQ qinq enable
Required
By default, basic QinQ is
disabled on all ports.