H3C Technologies H3C S7500E Series Switches - Manual (Page 142)

11-18
Follow these steps to enable local-first load sharing for link aggregation:
To do... Use the command... Remarks
Enter system view system-view —
Enable local-first load-sharing for
link aggregation
link-aggregation load-sharing
mode local-first
Optional
Enabled by default
Displaying and Maintaining Ethernet Link Aggregation
To do... Use the command... Remarks
Display the local system ID display lacp system-id Available in any view
Display the global or
group-specific link-aggregation
load sharing criteria
display link-aggregation
load-sharing mode [ interface
[ bridge-aggregation }
interface-number ] ]
Available in any view
Display detailed link aggregation
information on link aggregation
member ports
display link-aggregation
member-port [ interface-list ]
Available in any view
Display the summary of all
aggregation groups
display link-aggregation summary Available in any view
Display detailed information about
a specific or all aggregation groups
display link-aggregation verbose
[ bridge-aggregation }
[ interface-number ] ]
Available in any view
Clear LACP statistics for a specific
or all link aggregation member
ports
reset lacp statistics [ interface
interface-list ]
Available in user view
Clear statistics for a specific or all
aggregate interfaces
reset counters interface
[ bridge-aggregation }
[ interface-number ] ]
Available in user view
Ethernet Link Aggregation Configuration Examples