H3C Technologies H3C S7500E Series Switches - Manual (Page 219)

15-11
To do… Use the command… Remarks
view, Layer 2
aggregate
interface
view) or port
group view
Enter port group
view
port-group manual
port-group-name
In port group view, the
subsequent configurations apply
to all ports in the port group.
In Layer 2 aggregate interface
view, the subsequent
configurations apply to the Layer
2 aggregate interface and all its
member ports.
Configure the link type of the
port(s) as hybrid
port link-type hybrid Required
Assign the hybrid port(s) to the
specified VLAN(s)
port hybrid vlan vlan-id-list
{ tagged | untagged }
Required
By default, a hybrid port allows only
packets of VLAN 1 to pass through
untagged.
Configure the default VLAN of
the hybrid port
port hybrid pvid vlan vlan-id
Optional
VLAN 1 is the default by default.
To change the link type of a port from trunk to hybrid or vice versa, you must set the link type to
access first.
Before assigning a hybrid port to a VLAN, create the VLAN first.
After configuring the default VLAN for a hybrid port, you must use the port hybrid vlan command
to configure the hybrid port to allow packets from the default VLAN to pass through, so that the
egress port can forward packets from the default VLAN.
After you use the port link-type { access | hybrid | trunk } command to change the link type of
an interface, the loopback detection action configured on the interface with the
loopback-detection action command will be restored to the default. For details about the port
link-type command, see VLAN Commands in the Layer 2 - LAN Switching Configuration Guide.
After you configure a command on a Layer 2 aggregate interface, the system starts applying the
configuration to the aggregate interface and its aggregation member ports. If the system fails to do
that on the aggregate interface, it stops applying the configuration to the aggregation member
ports. If it fails to do that on an aggregation member port, it simply skips the port and moves to the
next port.
Port-Based VLAN Configuration Example
Network requirements
As shown in Figure 15-5 :