H3C Technologies H3C S7500E Series Switches - Manual (Page 32)

1-18
When configuring an OAA application, to ensure the normal communication between the switch and
the OAP card, you need to set the connection mode of the 10 GE ports connecting the switch and the
card to extended.
Follow these steps to configure the working mode of an Ethernet port:
To do… Use the command… Remarks
Enter system view system-view —
Enter 10 GE port view
interface interface-type
interface-number
—
Set the connection mode of the 10
GE port
port connection-mode { extend |
normal }
Required
Then connection mode of a 10 GE
port is normal by default.
Displaying and Maintaining an Ethernet Port
To do… Use the command… Remarks
Display the current state of a port
and the related information
display interface [ interface-type
[ interface-number ] ]
Available in any view
Display the summary of a port
display brief interface
[ interface-type
[ interface-number ] ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about
discarded packets on a port
display packet-drop interface
[ interface-type
[ interface-number ] ]
Available in any view
Display summary information
about discarded packets on all
ports
display packet-drop summary Available in any view
Clear the statistics of a port
reset counters interface
[ interface-type
[ interface-number ] ]
Available in user view
Clear the statistics of discarded
packets on a port
reset packet-drop interface
[ interface-type
[ interface-number ] ]
Available in user view
Display the Combo ports and the
corresponding optical/electrical
ports
display port combo Available in any view