H3C Technologies H3C S7500E Series Switches User Manual
Page 124
10-4
Refer to Information Center Configuration in the Network Management and Monitoring Configuration
Guide
for details.
2) Enable
MAC
Information.
# Enable MAC Information on Device.
[Device] mac-address information enable
# Configure MAC Information mode as Syslog.
[Device] mac-address information mode syslog
# Enable MAC Information on GigabitEthernet2/0/1
[Device] interface gigabitethernet2/0/1
[Device-GigabitEthernet2/0/1] mac-address information enable added
[Device-GigabitEthernet2/0/1] mac-address information enable deleted
[Device-GigabitEthernet2/0/1] quit
# Set the MAC Information queue length to 100.
[Device] mac-address information queue-length 100
# Set the interval for sending Syslog or trap messages to 20 seconds.
[Device] mac-address information interval 20