H3C Technologies H3C S7500E Series Switches - Manual (Page 54)

4-1
4
ONU Remote Management Configuration
When an S7500E switch is working as an OLT device, you can configure a variety of functions on its
ONU ports so that you can manage the connected ONUs remotely. This chapter describes only the
functions and commands developed specially for ONU ports on such an S7500E switch. Other
function configurations of ONU ports are basically the same as those of the Ethernet ports on an
S7500E switch. For details, see
ONU Port Features and Restrictions .
ONU Configuration
Currently, multiple types of H3C ONUs are compatible with the S7500E series switches, Support for
OLT remote management commands varies with ONUs. For details, see the sections describing the
supported configuration functions in ONU device user manuals. The following table lists the ONU
remote management functions supported by an S7500E switch working as an OLT device.
ONU Configuration Task List
Complete the following tasks to configure an ONU:
Task Remarks
Creating an ONU Port Required
Binding an ONU with an ONU Port Required
Configuring Batch ONU Binding and Automatic ONU Binding Optional
Configuring the Management VLAN of the ONU
Optional
For H3C ONUs only
Configure the ONU Bandwidth Allocation and Related Parameters
Optional
For H3C ONUs only
Enabling Related Protocols on an ONU
Optional
For H3C ONUs only
Configuring the Multicast Mode of the ONU Optional
Configuring the Link Type of an ONU Port Optional
Other ONU Enabling FEC Optional