H3C Technologies H3C S7500E Series Switches - Manual (Page 335)

24-2
Configuring MAC Information Mode 10-2
Configuring MAC-Based VLAN 15-15
Configuring Many-to-One VLAN Mapping
21-9
Configuring No Agreement Check 13-36
Configuring Null 0 Interface 8-2
Configuring One-to-One VLAN Mapping 21-7
Configuring One-to-Two VLAN Mapping
21-13
Configuring Outer VLAN Tag Priority 20-5
Configuring Path Costs of Ports 13-27
Configuring Port Isolation for a UNI 5-5
Configuring Port Priority 13-29
Configuring Ports as Edge Ports 13-26
Configuring Protection Functions 13-38
Configuring Storm Suppression 1-10
Configuring the Advertisable TLVs 22-9
Configuring the Aging Timer for Dynamic
MAC Address Entries
9-6
Configuring the Description of an Aggregate
Interface
11-13
Configuring the Interval for Sending Syslog
or Trap Messages
10-2
Configuring the Link Type of an OLT Port
3-5
Configuring the Link Type of an ONU Port
4-11
Configuring the Link Type of Ports 13-30
Configuring the MAC Information Queue
Length
10-3
Configuring the MAC Learning Limit 9-7
Configuring the Management Address and
Its Encoding Format
22-10
Configuring the Management VLAN of the
ONU
4-4
Configuring the Maximum Hops of an MST
Region
13-22
Configuring the Maximum Port Rate
13-25
Configuring the Mode a Port Uses to
Recognize/Send MSTP Packets
13-30
Configuring the Multicast Mode of the ONU
4-7
Configuring the Network Diameter of a
Switched Network
13-22
Configuring the Priority of a Device 13-21
Configuring the Root Bridge or a Secondary
Root Bridge
13-20
Configuring the Storm Constrain Function on
an Ethernet Port
1-11
Configuring the Timeout Factor 13-25
Configuring the VLAN Operation Mode for a
UNI
5-3
Configuring the Work Mode of an MSTP
Device
13-21
Configuring Timers of MSTP 13-23
Configuring Traffic Encryption 4-14
Configuring Two-to-Two VLAN Mapping
21-15
Configuring VLAN Transparent Transmission
20-6
Creating an ONU Port 4-2
D
Data Transmission 2-5
Deregistering an ONU 4-16
Disabling MAC Address Learning 9-5
Displaying and Maintaining Alarm
Configurations
6-15
Dynamic Aggregation Configuration Example
11-21
E
Enabling Alarm Monitoring 6-1
Enabling Basic QinQ 20-5
Enabling BPDU Tunneling 14-4
Enabling FEC 4-14
Enabling Layer-2 Communication Between
the ONUs Attached to an OLT Port
3-6
Enabling Link State Trapping for an
Aggregate Interface
11-13
Enabling LLDP Polling 22-9
Enabling LLDP 22-8