H3C Technologies H3C S7500E Series Switches - Manual (Page 279)

20-10
To do... Use the command... Remarks
Enter system view system-view —
Create a class and enter class view
traffic classifier classifier-name
[ operator { and | or } ]
Required
By default, the keyword and is
used.
Configure to
classify traffic
based on inner
VLAN
if-match customer-vlan-id
vlan-id-list
Configure the
matching criteria Configure to
classify traffic
based on inner
VLAN tag priority
if-match customer-dot1p
8021p-list
Required
Use either command.
Quit to system view quit —
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name Required
Configure the action of marking traffic
with the outer VLAN tag priority (that is,
802.1p priority)
remark dot1p 8021p Required
Quit to system view quit —
Create a QoS policy and enter QoS
policy view
qos policy policy-name Required
Associate the class with the traffic
behavior configured above
classifier classifier-name
behavior behavior-name
Required
Quit to system view quit —
Enter the view of
the Ethernet
port/Layer-2
aggregate
interface/port
Enter Ethernet
port view or
Layer-2
aggregate
interface view
interface interface-type
interface-number
Use either of the three
commands.
Configurations made in
Ethernet port view take
effect only on the current