H3C Technologies H3C S7500E Series Switches - Manual (Page 265)

19-7
Timer Lower limit Upper limit
LeaveAll Greater than the leave timer setting 32765 centiseconds
The GVRP configuration made on a link aggregation member port can take effect only after the port is
removed from the group. For more information about link aggregation, refer to Link Aggregation
Configuration in the Layer 2 - LAN Switching Configuration Guide.
Displaying and Maintaining GVRP
To do… Use the command… Remarks
Display statistics about GARP
display garp statistics [ interface
interface-list ]
Available in any view
Display GARP timers for specified
or all ports
display garp timer [ interface interface-list ] Available in any view
Display the local VLAN information
maintained by GVRP
display gvrp local-vlan interface
interface-type interface-number
Available in any view
Display the current GVRP state
display gvrp state interface interface-type
interface-number vlan vlan-id
Available in any view
Display statistics about GVRP
display gvrp statistics [ interface
interface-list ]
Available in any view
Display the global GVRP state display gvrp status Available in any view
Display the information about
dynamic VLAN operations
performed on a port
display gvrp vlan-operation interface
interface-type interface-number
Available in any view
Clear the GARP statistics
reset garp statistics [ interface
interface-list ]
Available in user view
GVRP Configuration Examples
GVRP Configuration Example I
Network requirements
Configure GVRP for dynamic VLAN information registration and update among devices, adopting the
normal registration mode on ports.