H3C Technologies H3C S7500E Series Switches - Manual (Page 243)

17-2
1) Configure the isolate-user-VLAN;
2) Configure the secondary VLANs;
3) Assign non-trunk ports to the isolate-user-VLAN and ensure that at least one port takes the
isolate-user-VLAN as its default VLAN;
4) Assign non-trunk ports to each secondary VLAN and ensure that at least one port in a secondary
VLAN takes the secondary VLAN as its default VLAN;
5) Associate the isolate-user-VLAN with the specified secondary VLANs.
Follow these steps to configure an isolate-user-VLAN:
To do... Use the command Remarks
Enter system view system-view —
Create a VLAN and enter VLAN view vlan vlan-id —
Configure the VLAN as an
isolate-user-VLAN
isolate-user-vlan enable Required
Return to system view quit —
Access port
Refer to Assigning an Access Port to a
VLAN
Assign ports to the
isolate-user-VLAN
and ensure that at
least one port takes
the
isolate-user-VLAN
as its default VLAN
Hybrid port Refer to Assigning a Hybrid Port to a VLAN
Use either approach.
Return to system view quit —
Create secondary VLANs vlan { vlan-id1 [ to vlan-id2 ] | all } Required
Quit to system view quit —
Access port
Refer to Assigning an Access Port to a
VLAN
Assign ports to
each secondary
VLAN and ensure
that at least one
port in a secondary
VLAN takes the
secondary VLAN
as its default VLAN
Hybrid port Refer to Assigning a Hybrid Port to a VLAN
Required to choose
either
Return to system view quit —
Associate the isolate-user-VLAN with
the specified secondary VLANs
isolate-user-vlan isolate-user-vlan-id
secondary secondary-vlan-id [ to
secondary-vlan-id ]
Required