Gasboy CFN III Config Mnl V3.4 - Manual (Page 82)

Console Configuration
Page 76 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
Figure 11-4: Default Action Assignments for Check Point Keys - 36- and 56-key
Keyboard
Default Key Actions
The following table (see next page) gives the default key actions. The default key actions are
listed in submenu 2. They are the actions that can be assigned to the Check Point keys by
submenu 1. Also shown are default permission levels, which can be modified in submenu 2,
and an abbreviated description (the table following this one gives a more complete
description).
Note: Action numbers may change. Verify the action numbers by checking submenu 2 on your
Site Controller.
Assigning Products
As shown on the following table, actions 30-37 assign a single product to a console key or
several products to a multi-product key.
• Action 30 specifies that the clerk can first enter the product number before pressing the
key that action 30 has been assigned to.
• Actions 31-33 specify that the clerk can first enter the quantity of the product before
pressing the assigned key to ring up the sale.
• Actions 34-37 specify that the price can be entered first.
Before assigning a product to a key, ensure that you know the product's number or code, which
you assigned to that product when you entered it into the Site Controller with the LOAD
PRODUCT command. You will be asked for this number or code when you assign that
product to the key.