Gasboy CFN III Config Mnl V3.4 - Manual (Page 75)

MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007 Page 69
Unitec Wash Parameters
10 – Unitec Wash Parameters
To change the parameters of the car wash, select submenu 3, Unitec Wash Parameters from
the Gate Menu. The information in
Figure 10-1 is displayed.
Figure 10-1: Car Wash Parameters Screen
# Description
1 Reader car wash prompt line 1: what type of wash
2 line 2:
3 line 3:
4 line 4:
5 Car wash price code: 0
6 Days carwash code valid: 0
------------------------------------------------------
Enter number of parameter to modify or q to quit:
The items you can configure in the Unitec wash parameters are:
• Reader car wash prompt line 1 [What type of car wash]: Enter the first line of the display.
The default will be displayed between the brackets. Enter additional information for lines
2-4 if needed. This information will be displayed at the card reader.
Ensure to add a “WANT CAR WASH” type step in reader program. See step 8 on page 58
for more information.
• Car wash price code [0]: The car wash driver uses this one price CODE for all car washes.
Each car type used the price LEVEL corresponding to its type. For example, car wash type
42 will use price level 42 of the price code configured here.
• Days car wash code valid [0]: The Unitec car wash controller does not remove wash codes
from memory automatically. It must be done by user command at the Unitec console. The
number of days listed here is to tell customers how often you plan to clear the Unitec
memory.
Unitec Wash Types
To change the types of the car wash, select submenu 4, Unitec Wash Types from the Gate
Menu. The information in
Figure 10-2 on page 70 is displayed.