Island card reader (reader) – Gasboy CFN III Config Mnl V3.4 User Manual
Page 104
Key Option Configuration
Page 98 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
The Key Option on the CFN allows the odometer to be stored on the key for reasonableness
check. If you are using this option, when the user enters the odometer, it is verified at the
reader against the odometer stored on the key. If you are using this option, you must set the
following system parameters:
MPG package used for club cards = no
If you are using the MPG package feature of the CFN system (refer to Miles Per Gallon
package), set the following system parameters:
MPG package used for club cards = yes
Maximum miles between fuelings = (4 digit #, Max. 9999)
Club odometer tries allowed = 0
Island Card Reader (READER)
The Island Card Reader (ICR) reader program (MENU 1) must be set-up as follows:
Step 3 - PIN
Enter PIN message must be preceded by a space, must be in all capital letters, and must say
ENTER YOUR PIN.
Number of digits = Must be at least 4
Optional = yes
Step 7 - Odometer
Use default Enter Odometer message
Number of digits = 6
Optional = yes
Step 11 - Remove Card
This step must be used with systems that have the Key Option. The message can be changed to
read: “Remove Key” or “Remove Card/Key.”
An example is shown in
.