Gasboy CFN III Config Mnl V3.4 - Manual (Page 54)

Local Transaction Printout Format
Page 48 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
20 Sequence number: A four-digit number assigned to transactions by the Site Controller at the
start of each transaction. It is used to identify transactions in Site Controller-host
communications. This field is usually not needed in the transaction printout for sites that are
not connected to a host.
21 Router variable 1: A seven-digit reference number for a bank network, if all digits. Use only
if your card-verification network requires this information on the printout. Check the router
documentation. May be used if using a Fuel Point Reader.
22 Router variable 2: A nine-digit reference number for a bank network, if all digits. Fields 21
and 22 are used together to provide up to 16 digits for a bank number, in the cases where a
bank number is too long to fit only into field 21 or 22. Use only if your card-verification
network requires this information on the printout. Check the router documentation. May be
used if using a Fuel Point Reader.
23 Router variable as a string: A nine-character reference number for bank network, if it
includes alphabetic characters. Check the router documentation. May be used if using a Fuel
Point Reader.
24 Device type and drop: The type of device and number of the device that originated the
transaction. The first digit is the device type and the second digit is the device number. For
example, island card reader 1 is 31.
1- site controller 6 - gate controller
3 - island card reader 7- tank gauge
4 - console 9 - chain
5 - Fuel Point A - full serve
25 Kind of transaction: The kind of transaction: a regular sale, a refund, and so on.
0 - regular sale 2 - return
1 - transaction with more refunded than sold 3 - payout
26 Router variable 3: A four-digit reference number for a bank network, if all digits. Use only if
your card-verification network requires this information on the printout. Check the router
documentation. Also, miles between fuelings if using MPG and Fuel Point.
27 Router variable 1 as $: Prints router variable 1 as a monetary sum by inserting a decimal
point in front of the two rightmost digits. (Patronage)
28 Expiration date: Card expiration date.
29 CFN Network ‘CARD’ field: This is a seven character field if the account is club or blank for
a non-club. Sorting the card field will be based on the first six digits of the PAN.
Account data cannot be masked on the logger printout, when this field type is used. Only type-
2 fields can be masked. A type-29 field will always be masked on the receipt. In order for
these digits to be unmasked on the receipt, an additional type-2 field that includes these
account digits will need to be configured at the end of TRFMT.