Gasboy CFN III Config Mnl V3.4 - Manual (Page 76)

Unitec Wash Parameters
Page 70 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
Figure 10-2: Unitec Wash Types Screen
# Stock Dept. Disc Name Functions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
-------------------------------------------
Enter a to add, d to delete, m to modify, q to quit, or RETURN for next page
The following can be added or modified:
• Stock Number (from 100-65530)[0]: Enter a unique stock number for this wash type.
• Associated department [10]: Enter the department (product code) this wash will be
included in.
• Discount level [0]: Discounts are used to allow island reader transactions to get a reduced
price for a wash depending on how much fuel they buy. At the reader, only wash types of
discount level zero may be chosen. When the sale completes, the type table is scanned for
wash types with the same functions included but a different discount level. If the sale
qualifies for the discount and the price is actually lower, the wash type for the sale will be
changed to the discounted one. For POS transactions, any type of wash can be chosen and
it is up to the clerk to assign the correct wash type to the sale.
• Name: Enter the name of the wash type.
• Enter wash functions: A car wash consists of from 1 to 12 functions that can be enabled
for a given wash. Consult the way your wash controller is configured to determine which
combinations you desire to sell as different washes.
Enter a plus (+) to add or a minus (-) to subtract a function followed by the function number.
You may do more than one. For example: +1+2+3-4-5 will add functions 1, 2, and 3, and
subtract 4 and 5.