Gasboy CFN III Config Mnl V3.4 User Manual
Page 39
MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
Page 33
Pump Configuration
8
Pump is a Tokheim stand-alone dispenser or Gasboy SPD version 4.3+ or PAC version
4.2+.
9
Pump can only be activated from downloaded prices (the displayed prices are
downloaded).
10
Pump never needs switch detect to activate (can be activated while it is still on-hook).
11
The PCU is slow to respond to requests (improves performance on pumps that are
inherently slow to respond or at sites that have a large number of pumps and are very
busy).
12
The pump is a blender. (The Site Controller may not be able to keep component
product tank inventories for types of blender pumps that are not specifically supported
by Gasboy. Do not use this option for Gilbarco and Tokheim Blenders except for 5
product. The 5 product blender requires the 12 option.
13
The pump is a TCS configured to always download prices. (This allows TCS pumps to
display the correct price level for a sale, provided that the pump's Tokheim firmware
supports the Mode 25 feature.)
14
Pump is a Gasboy PAC.
15
Single-sided pump (used for PCU auto-configuration).
16
Tokheim Premier or Wayne blender with side hose.
17
Requires START button (not required for Tokheim).
18
Beeps when offhook without payment type selected.
19
Multiple button product selected.
20
Beeps when offhook without START button being pressed.
21
Pump has lift lever for offhook.
22
Pump is the master of the pump chain. Turning on this pump activates all other
“pumps” (such as grease guns or car wash) in its cluster except other master pumps in
that cluster.
23
Wayne 3 product blender, hoses 1,3 and 5. For Wayne products V580 and V590U
only. Previously these pumps required using 5 hoses, setting the price code for hoses 2
& 4 to 99. With this option, only define 3 hoses; the Wayne driver maps them to the
appropriate pump positions automatically.
The pre-defined pump types are shown in
.