Gasboy CFN III Config Mnl V3.4 - Manual (Page 20)

System Parameters
Page 14 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
47 Auto receipt: duplicate receipts printed: Will another receipt be printed if the card is swiped
a second time after pumping. The default is no, which lessens the chance of the printer
jamming on unclaimed receipts.
48 Reader types that print receipt without asking after sale: Specifies what reader types will
always automatically print a receipt when sale is completed.
(0=None,1=CRIND,2=ICR,3=ALL). For all transactions on pumps with no internal reader,
the receipt will automatically be printed on the lowest numbered ICR assigned to the same
cluster as the pump.
49 Reader ignores PIN restriction on card: Specifies that a PIN is not needed even if the
restriction code requires a PIN provided that Check PIN is not set.
50 Keypads: Holds 2 separate keypad layouts. The user may pick any 2 from the following
• CRIND
• WCAT
• CRIND/WCAT (like old setting when keypad length was 20)
• DPT (like old setting when keypad length was 24)
The keypads are loaded 1 at a time. The customer is first asked to select which keypad to load,
and then is asked to load the keypad string for that reader type. He can then select the keypad
again and enter the keypad layout for another type. The last 2 different types entered are saved.
The program only sends the keypad to the type of device specified.
51 Require clerk approval for reader transactions: Some fire marshals require that a clerk
approve all reader transactions before fuel can be pumped; this is a safety measure to prevent
customers from dealing with materials like propane themselves. The default is no.
52 Reader requires attendant card for transactions (Y/N/cluster #): Y = all clusters, N =
none, 0 - 9 applies only to the specified cluster. The Attendant number from card becomes the
clerk number for tracking.
If set to yes, a transaction from the reader will require an Attendant card to be swiped
following any payment card. If swiped without a payment card, the access card will be treated
as a Club and will not require an additional card swipe. This allows attendants to charge
customer’s cash sales to their attendant account.
53 Reader requires Patron/Loyalty card for transactions: Enter 0 = No, 1 = Before, 2 = After,
3 = Maybe. Patron is not required, but if swiped before payment, it is assigned to the
transaction and payment is prompted for. The default is no.