Gasboy CFN III Config Mnl V3.4 - Manual (Page 64)

Island Card Reader Configuration
Page 58 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
3 Enter PIN: PIN entry can be made optional. If it is optional, it will be requested only if the
PIN entry requirement is encoded on the customer's card or if it is required by the system
parameters. The display should be masked for PIN entry.
In order to meet Visa ® PED and PCI requirements, the PIN prompt must conform to a specific
message type. Some common options are:
• ENTER PERSONAL ID
• ENTER DRIVER NO
• ENTER CLUB ID
• ENTER FLEET PIN
• ENTER ID NUMBER
Note: For a comprehensive list of Visa PED/PCI PIN prompts, Contact technical services.
The default message is ENTER FLEET PIN.
Starting with site version V034E, a second Enter PIN prompt is needed for secure debit
transactions. A secure transaction requesting a PIN can be prompted with any free field text
that fits within the reader prompting limitations. If debit transactions are going to be
processed, two “Enter PIN” steps must be used. The two steps must be contiguous: the first
represents the non-secure (club) PIN prompt, even if a non-secure prompt is not required; the
second represents the secure debit prompt.
4 Enter amount: The amount entry can be optional. If it is optional, the Site Controller will ask
for it only if it is a bank card or if it is required by the club card restriction code.
The default message is $ AMOUNT or FILL.
5 Enter account: This step can be optional.
The default message is FROM WHICH ACCOUNT?.
6 Enter auxiliary number: This step can be optional. Use it if you want some number-vehicle,
employee, purchase order, and so on.-to be stored with the transaction.
7 Enter odometer: The enter odometer step can be optional. If odometer entry is optional, it
will be requested only if the odometer entry requirement is encoded on the customer's card.
The default message is ENTER ODOMETER.
8 Want car wash: An optional step to prompt the customer if they want a car wash. The default
message is WANT CAR WASH?
This step is also used for selling merchandise from an ICR with an Insight. A 'want merch?'
step in the reader program is a 'want car wash' type step with “~M” somewhere in the text.
This works only on CFN III v3.3 with Insight. This step must come after the “Select Pump”
step.
9 Verify card: This step seeks validation from the Site Controller, CFN host, or bank network
for the card being used in a purchase. This step must be included and should follow Select
Pump. See your Gasboy Representative if you require a different setup.