Gasboy CFN III Config Mnl V3.4 - Manual (Page 30)

System Parameters
Page 24 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
137 Alternate expiration date: Allows a grace period for expired cards if a non-zero value is
entered. First value is the month; second value is the year. If either value is not zero, all cards
will be compared with this month and year, rather than the month and year on the system
clock, to determine whether each card has expired.
138 Number to add to club price level: Allows club cards to use a different price level than the
level encoded on the cards.
139 Transaction file full warning percentage: Determines how full the main transaction file may
become before a warning message is logged. Enter as percentage full.
140 Fuel authorization code for bank cards: Which types of fuel can be purchased by bank
cards? Only one code can be entered; select one of the authorization numbers set up with the
LOAD AUTHORIZATION command. Default is none.
141 Check fuel authorization codes on postpay: Should a postpay transaction be disallowed
because the customer pumped a product that was not one of the products permitted by the
authorization code encoded on his card?
142 Always request dollars from CFN host: Always request transaction authorization in dollars
from the remote host for the specified type of transactions.
Types are: 1 = club, 2 = checking, 3 = savings, 4 = credit, 0 = none. Enter selected types as a
string with no spaces; for example: 24 specifies checking and credit.
143 Send transactions to CFN host: Which types of transactions should be sent to the CFN host?
Types are: 1 = club, 2 = checking, 3 = savings, 4 = credit, 5 = cash, 6 = unpaid, 0 = none. Enter
selected types as a string with no spaces; for example: 124 specifies club, checking, and credit.
144 Generate card swipe event: Should the system generate an event on every card swipe (Y/N)?
Page 12: Receipt Configuration
The receipt format determines the information that will appear in the core of a printed receipt.
The receipt header and footer are entered with the Site Controller command LOAD
HEADING. The date and time of the transaction and the site number, transaction number,
authorization number, customer account number, pump number, and type of fuel pumped
appear on receipts unless a format from the bank overrides the standard format.
145 System volume units: Units the system uses for fuel volume.
G = gallons; L = liters. Default is gallons.
146 Minutes until ICR expires (1440): This is the maximum amount of time, in minutes, that a
receipt may be printed for a transaction.The range is from 20 minutes to 24 hours. The other
constraint of receipts not being available after 100 transactions are stored in the transaction file
still pertains.