Page 13: miles-per-gallon package – Gasboy CFN III Config Mnl V3.4 User Manual
Page 32
![background image](https://www.manualsdir.com/files/787460/content/doc032.png)
System Parameters
Page 26
MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
Page 13: Miles-Per-Gallon Package
158
MPG package used for club cards: Specify whether to calculate miles per gallon for club
card transactions. To calculate MPG, the vehicle number must be entered into the system with
the Site Controller LOAD VEHICLE command, and the vehicle number must be part of the
club card account number, or it must be entered by the customer at the island card reader or
console. Must be set to YES for vehicle number to print on the receipt.
159
MPG package used for bank cards: Specify whether to calculate miles per gallon for bank
card transactions. To calculate MPG, the vehicle number must be entered into the system with
the Site Controller LOAD VEHICLE command, and the vehicle number must be entered by
the customer at the island card reader or console.
160
Low MPG: Specify the minimum miles per gallon the Site Controller will consider normal. If
the MPG is lower than this, it is marked LOW in the vehicle report.
161
High MPG: Specify the maximum miles per gallon the Site Controller will consider normal.
If the MPG is higher than this, it is marked HIGH in the vehicle report.
162
Maximum miles between fuelings: Specify the maximum miles between fuelings the Site
Controller will consider acceptable.
163
Club odometer tries allowed: Specify the number of retries a club card customer will be
allowed if the Site Controller does not accept the odometer entry.
164
Bank odometer tries allowed: Specify the number of retries a bank card customer will be
allowed if the Site Controller does not accept the odometer entry.
165
Accept Club odometer: Specify whether to accept, for storage in the Site Controller's
records, a club card customer's odometer entry even if it is out of range after the maximum
number of retries. If a customer enters 0 and it is accepted, the record will be reset.
166
Accept Bank odometer: Specify whether to accept, for storage in the Site Controller's
records, a bank card customer's odometer entry even if it is out of range after the maximum
number of retries.
167
Use aux info field for vehicle number: Which types of cards should use the auxiliary
information entered at the island card reader or console as the vehicle number.
Types of cards are: 1 = club, 2 = checking, 3 = savings, 4 = credit, 0 = none. Enter selected
types as a string with no spaces; for example: 24 specifies checking and credit.