Gasboy CFN III Config Mnl V3.4 - Manual (Page 26)

System Parameters
Page 20 MDE-4316C CFN Series CFN III Configuration Manual for Windows NT® · April 2007
93 Poll split Tokheim loops fast: The default is NO which uses less CPU time. Default polling is
30 polls per second. Fast is 50 polls per second.
94 Host handler channel: This is the host verification channel. Default is 0 (none).
95 Host handler baud rate: The baud rate used by the host handler. The baud rate is ignored for
synchronous protocols.
96 Verification time-out (routers): The time (in seconds) that the Site Controller waits for
verification from the host. The default verification time-out of 75 seconds is usually
reasonable. Default is 75 seconds.
97 Verification time-out (CFN Host): The time (in seconds) that the Site Controller waits for
verification from the CFN host. Default is 0 seconds.
98 Host router data: Data the router uses to identify the site. The data to be entered depends on
the router used. Check the specific router manual for more information.
99 More router data: More data used by the router. The data to be entered depends on the router
used. Check the specific router manual for more information.
100 Send requests to host handler: For which types of cards should authorization requests be
sent to the host handler.
Types of cards are:
1 = club
2 = checking
3 = savings
4 = credit
0 = none.
Enter selected types as a string with no spaces; for example: 24 specifies checking and credit.
101 Host handler data: Enter the data for handler configuration. The data to use depends on
which handler is being used. The program will ask for handler data #1, handler data #2, and so
on through all 16 entries. Enter each separately. For more details on handler data, see your
specific Credit and Debit manual.