Comtech EF Data NetVue Release 1.1 User Guide - Manual (Page 247)

SNMP Managers Revision 3
NetVue User Guide MN-NETVUE
A–10
A.8.1 General MIBs
The general NetVue MIBs describe the default SNMP traps sent by the NetVue System. They are
shipped with every version of the NetVue Agent software.
On a NetVue Agent, the general MIBs are in the C:\Skyline NetVue\MIBs\ folder.
A.8.2 Protocol-specific MIBs
Additionally, you can use MIBs for specific NetVue protocols. However, these MIBs must be generated
manually.
A.9 Generating a protocol-specific MIB
To control an element using a specific protocol version via SNMP, create a MIB file. The MIB file must be
based on the parameter information in that protocol version.
1. In System Display, go to Admin ‣ Protocols
2. In the Protocol list pane on the left, select a specific protocol version.
3. In the General tab, click Get MIB.
4. In the Save As dialog box, select a name and a location for the new MIB, and click Save.
A.10 NetVue SNMP trap definition
• Default NetVue trap
• Custom NetVue trap
• Syntax of OIDs referring to properties
A.11 Default NetVue trap
A.11.1 SNMPv1 header data
The header of an SNMPv1 trap contains this data:
• Enterprise 1.3.6.1.4.1.8813
• agent-addr IP address of SNMP agent that sent the trap
• generic-trap enterpriseSpecific (6)
• specific-trap Parameter ID