Compuprint 4247-Z03 Programmer Manual - Manual (Page 63)

This control moves the current horizontal print position to the left margin. If Carriage Return equals
Carriage Return + Line Feed, a Line Feed is executed when Carriage Return is received. Otherwise, the
vertical position does not change. Carriage Return is a line ending control code that causes buffered data
to print.
Shift Out (SO) / Double-Wide Print
0E
This control causes the printer to start double-width printing. Double-width printing prints the characters
twice as wide as the current character spacing. This results in half as many characters per inch. Each
character takes up the space of two single-width characters. A Carriage Return, Line Feed, Form Feed,
Vertical Tab, Double-Wide Continuous Mode, Cancel Double-Wide Print, or Set Presentation Position with
vertical movement specified cancels the Shift Out control code.
Shift In (SI) / Condensed Print
0F
This control prints graphic characters in condensed pitch (15, 17.1, or 20 CPI). If the current print option is
10 CPI this control will condense printing to 17.1 CPI. If the current print option is 12 CPI this control will
condense printing to 20 CPI. If the current print option is 15 CPI there is no change in density. This control
changes the maximum number of characters that can be printed on one line. Shift In is a buffer
terminating control; if printable data at a different character-per-inch setting is buffered, that data is printed
before the setting is changed. The current presentation position becomes the next printable column at the
new character-per-inch setting. CPI can be changed within a print line.
Device Control 1 (DC1) / Select
11
This control selects the printer.
Device Control 2 (DC2) / Cancel Condensed Print
12
This control cancels or ends condensed (17.1 or 20 CPI) printing. DC2 is a buffer terminating control; if
printable data at a different characters-per-inch setting is buffered, that data is printed before the setting is
changed. The current presentation position becomes the next printable column at the new
character-per-inch setting. CPI can be changed within a print line.
Device Control 3 (DC3) / Deselect
13
This control is treated as a NUL.
Chapter 2. Epson FX-1050 Data Stream 43