Compuprint 4247-Z03 Programmer Manual - Manual (Page 53)

NN is a one-byte hexadecimal number that specifies the height of the bar code symbol as 1 to 12 (1/6 to
12/6 inch, or 2 inches).
PP is a one-byte hexadecimal number that specifies whether or not to print the bar code in Human
Readable Characters as follows:
00
Do not print human readable characters
01 Print human readable characters
Select CODE 128 Bar Code (DC4 DC4 ESC ! NN 23 PP EM)
14 14 1B 21 NN 17 PP 19
This control selects the Code 128 bar code.
The DATA field for this bar code does not have a defined length, and must contain only the data
characters belonging to the selected ASCII character set, including control characters.
Since GS and EM are control codes, the host application must set the high-order bit of the control code to
allow the printer to distinguish between encodable data and terminator strings.
Human Readable Characters will be centered below the bar code and can be wider than the encoded
area. The user is responsible for allowing space for Human Readable Characters to print without
overlapping adjacent data.
NN is a one-byte hexadecimal number that specifies the height of the bar code symbol as 1 to 12 (1/6 to
12/6 inch, or 2 inches).
PP is a one-byte hexadecimal number that specifies whether or not to print the bar code in Human
Readable Characters as follows:
00
Do not print human readable characters
01 Print human readable characters
Select POSTNET Bar Code (DC4 DC4 ESC ! NN 24 PP EM)
14 14 1B 21 NN 18 PP 19
This control selects the POSTNET [ZIP, ZIP+4, or Delivery Point Bar Code (DPBC)] bar code.
The DATA field for this bar code must contain only ASCII numeric (0 to 9) data. A data string of all zeroes
will be encoded if other than numeric data is detected in the job stream.
POSTNET bar code does not print Human Readable Characters, regardless of the PP byte. POSTNET
uses the tall and short bars required by the United States Postal Service standard, and encodes numeric
data streams regardless of length.
NN is a one-byte hexadecimal number that specifies the height of the bar code symbol as 1 to 12 (1/6 to
12/6 inch, or 2 inches).
PP is a one-byte hexadecimal number that specifies whether or not to print the bar code in Human
Readable Characters as follows:
00
Do not print human readable characters
01 Print human readable characters
Chapter 1. Personal Printer Data Stream (PPDS) 33