Compuprint 4247-Z03 Programmer Manual - Manual (Page 61)

MPP (depth) Operator panel setting
CPI Operator panel setting
LPI Operator panel setting
LM 0 inches (Column 1)
RM Equal to MPP
HT Horizontal tabs are set at each 8th column, starting with column 9 (9, 17,
25, 33, and so on.)
VT Vertical tabs are all cleared
One-Byte Controls
Note: Control hex values within parentheses are recognized only within PC Character Set 1.
The printer uses the following one-byte controls:
Control Hex Name
NUL 00 (80) Null (no operation)
BEL 07 (87) Bell
BS 08 (88) Backspace
HT 09 (89) Horizontal Tab
LF 0A (8A) Line Feed
VT 0B (8B) Vertical Tab
FF 0C (8C) Form Feed
CR 0D (8D) Carriage Return
SO 0E (8E) Shift Out (Double-Wide Print)
SI 0F (8F) Shift In (Condensed Print)
DC1 11 (91) Device Control 1 (Parallel Select)
DC2 12 (92) Device Control 2 (Cancel Condensed Print)
DC3 13 (93) Device Control 3 (Parallel Deselect)
DC4 14 (94) Device Control 4 (Cancel Double-Wide Print)
CAN 18 (98) Cancel
SP 20 Space
DEL 7F Delete Character
Null (NUL)
00
This control terminates the Set Horizontal Tab and Set Vertical Tab control codes. The printer ignores NUL
by itself.
Bell (BEL)
07
This control causes the audible alarm to sound.
Chapter 2. Epson FX-1050 Data Stream 41