Chapter 5. ipds exception reporting codes, Command reject - x'80, Intervention required - x'40 – Compuprint 4247-Z03 Programmer Manual User Manual
Page 219: Exception reporting group codes
Chapter 5. IPDS Exception Reporting Codes
The following tables contain the exception reporting codes, which the printer sends to the host in the
NACK reply. These codes are in a three-byte format. The first byte, byte 0, is the error group. The
remaining two bytes, bytes 1 and 2, are the individual error identifiers. Table 8 shows the error group
meanings:
Table 8. Exception Reporting Group Codes
Byte 0
Error Type
80
40
“Intervention Required - X'40'”
10
“Equipment Check - X'10'” on page 200
08
“Data Check - X'08'” on page 200
04
“Specification Check-Bar Code - X'04'” on page 200
03
“Specification Check-Graphics - X'03'” on page 202
02
“Specification Check-General - X'02'” on page 204
01
“Conditions Requiring Host Notification - X'01'” on page 213
Command Reject: Indicates that the printer cannot recognize a received command.
Intervention Required: Indicates that the printer requires operator intervention.
Equipment Check: Indicates that a hardware error has occurred. Data Check: Indicates that the printer
detects a data error when receiving a logical unit from the application program or that the printer detects a
data error while printing the page.
Specification Check: Indicates that the data parameters or values in a received command are invalid.
Condition Requiring Host Notification: Indicates that the printer has detected an error or condition that
should be reported to the host computer.
Command Reject - X'80'
The following exception codes are the valid codes for a command reject condition:
X'800100'
Invalid IPDS Command Code
Explanation:
1. The command code is not recognized. A error length
on a previous command may have caused the
current data to be processed as a command.
2. The command is not supported.
Alternate Exception Action: None
X'800200'
Invalid IPDS Command Sequence
Explanation: The printer state is invalid for the
received command.
Alternate Exception Action: None
Intervention Required - X'40'
The following exception codes are the valid codes for an intervention required condition:
X'400000'
Printer Not Ready
Explanation: The printer needs operator intervention
to tear off a continuous forms paper source so paper
source switching can be done when in 4224 emulation
mode.
Alternate Exception Action: None.
199