Compuprint 4247-Z03 Programmer Manual - Manual (Page 29)

Control Hex Name
ESC ] 1B 5D Reverse Line Feed
ESC ^ 1B 5E Print Single Characters
ESC _ 1B 5F Continuous Overscore
ESC d 1B 64 Relative Move Right
ESC e 1B 65 Relative Move Left
ESC [ - (See Note) 1B 5B 2D Select Line Scoring
ESC [ @ 1B 5B 40 Set Presentation Highlights (SPH)
ESC [ I (See Note) 1B 5B 49 Set Font Global (SFG)
ESC [ K 1B 5B 4B Set Initial Conditions (SIC)
ESC [ T (See Note) 1B 5B 54 Select Code Page (SCP)
ESC [ d (See Note) 1B 5B 64 Set Print Quality (SPQ)
Note: Commands are only available in 4247 or 2381 emulation mode.
Null (ESC NUL)
1B 00
The printer ignores the NUL control by itself.
Bell (ESC BEL)
1B 07
This control causes the audible alarm to sound, if enabled. The alarm may be disabled or enabled from
the Configuration Menu.
Backspace (ESC BS)
1B 08
This control moves the print position horizontally one character width to the left. If the current print position
is at the left margin, the printer ignores this command.
Horizontal Tab (ESC HT)
1B 09
This control moves the print position to the next horizontal tab stop. If there are no tab stops to the right,
or if the next tab stop is beyond the current right margin, the control is ignored.
Line Feed (ESC LF)
1B 0A
Chapter 1. Personal Printer Data Stream (PPDS) 9