Compuprint 4247-X03 Programmer Manual Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for 4247-X03 Programmer Manual Compuprint
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 380 |
| Size: | 19.79 MB |
Show table of contents
Document Outline
- Contents
- Figures
- Tables
- The 4247 Model X03/Z03 Serial Matrix Printers
- Chapter 1. Personal Printer Data Stream (PPDS)
- Print Job Processing
- Page Printing Concept
- Page Presentation
- Graphic and Control Character Sequences
- PPDS Compatibility
- One-Byte Controls
- Null (NUL)
- Bell (BEL)
- Backspace (BS)
- Horizontal Tab (HT)
- Line Feed (LF)
- Vertical Tab (VT)
- Form Feed (FF)
- Carriage Return (CR)
- Shift Out (SO) / Double-Wide Print
- Shift In (SI) / Condensed Print
- Device Control 1 (DC1) / Select
- Device Control 2 (DC2) / Select
- Device Control 3 (DC3) / Select
- Device Control 4 (DC4) / Select
- Cancel (CAN)
- Escape (ESC)
- Space
- Escape Sequence Controls
- Null (ESC NUL)
- Bell (ESC BEL)
- Backspace (ESC BS)
- Horizontal Tab (ESC HT)
- Line Feed (ESC LF)
- Vertical Tab (ESC VT)
- Form Feed (ESC FF)
- Carriage Return (ESC CR)
- Shift Out (ESC SO) / Doube-Wide Print
- Shift In (ESC SI) / Condensed Print
- Device Control 1 (ESC DC1 / Select)
- Device Control 2 (ESC DC2) / Select 10 CPI
- Device Control 3 (ESC DC3) / Deselect
- Device Control 4 (ESC DC4) / Cancel Double-Wide Print
- Cancel (ESC CAN)
- Auto Underscore (ESC -)
- Set 1/8 Inch Line Spacing (ESC 0)
- Set 7/72 Inch Line Spacing (ESC 1)
- Invoke Text Line Spacing (ESC 2)
- Set Graphics Line Spacing (ESC 3)
- Set Top of Form (ESC 4)
- Set Auto Line Feed (ESC 5)
- Select PC Character Set 2 (ESC 6)
- Select PC Character Set 1 (ESC 7)
- Set 12 CPI (ESC :)
- Unidirectional Printing (ESC <)
- Character Font Image Download (ESC =)
- Select n/72 Inch Line Spacing (ESC A)
- Set Vertical Tabs (ESC B)
- Set Page Length (ESC C)
- Set Horizontal Tabs (ESC D)
- Begin Emphasized Print (ESC E)
- End Emphasized Print (ESC F)
- Begin Double-Strike Print (ESC G)
- End Double-Strike Print (ESC H)
- Change Font (ESC I)
- Relative Move Baseline (ESC J)
- Normal Density Bit Image Graphics (ESC K)
- Dual Density Bit Image Graphics Type 1 (ESC L)
- Begin Skip Perforation (ESC N)
- End Skip Perforation (ESC O)
- Proportional Space Mode (ESC P)
- Deselect on Positive Query Reply (ESC Q)
- Set Default Tabs (ESC R)
- Begin Subscript/Superscript (ESC S)
- End Subscript/Superscript (ESC T)
- Set Print Direction (ESC U)
- Double-Wide Continuous Mode (ESC W)
- Set Horizontal Margins (ESC X)
- Dual Density Bit Image Graphics Type 2 (ESC Y)
- High Density Bit Image Graphics (ESC Z)
- Print All Characters (ESC \)
- Reverse Line Feed (ESC ])
- Print Single Character (ESC ^)
- Continuous Overscore (ESC _)
- Relative Move Right (ESC d)
- Relative Move Left (ESC e)
- Select Line Scoring (ESC [ -)
- Set Presentation Highlight (SPH) (ESC [ @)
- Set Font Global (SFG) (ESC [ I)
- Set Initial Conditions (SIC) (ESC [ K)
- Select Code Page (SCP) (ESC [ T)
- Set Print Quality (SPQ) (ESC [ d)
- 4247 Commands
- Select EAN-8 Bar Code (DC4 DC4 ESC ! NN 1 PP EM)
- Select EAN-13 Bar Code (DC4 DC4 ESC ! NN 2 PP EM)
- Select UPC-A Bar Code (DC4 DC4 ESC ! NN 3 PP EM)
- Select MSI Bar Code (DC4 DC4 ESC ! NN 4 PP EM)
- Select UPC-E Bar Code (DC4 DC4 ESC ! NN 5 PP EM)
- Select UPC 2-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 6 PP EM)
- Select UPC 5-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 7 PP EM)
- Select 2 of 5 INTERLEAVED Bar Code (DC4 DC4 ESC ! NN 17 PP EM)
- Select 2 of 5 INDUSTRIAL Bar Code (DC4 DC4 ESC ! NN 18 PP EM)
- Select 2 of 5 MATRIX Bar Code (DC4 DC4 ESC ! NN 19 PP EM)
- Select CODE 3 of 9 Bar Code (DC4 DC4 ESC ! NN 20 PP EM)
- Select CODABAR Bar Code (DC4 DC4 ESC ! NN 22 PP EM)
- Select CODE 128 Bar Code (DC4 DC4 ESC ! NN 23 PP EM)
- Select POSTNET Bar Code (DC4 DC4 ESC ! NN 24 PP EM)
- Print Bar Code Selection (DC4 DC4 ESC ( GS {N1} {DATA1} GS {N2} {DATA2} EM)
- Reinitialize Printer (DC4 DC4 ESC @)
- Set Vertical Spacing n/144 Inch (DC4 DC4 ESC 1 NN)
- Set Vertical Spacing 12 Lines/30mm (DC4 DC4 ESC 3 1)
- Set Vertical Spacing 3 Lines/30mm (DC4 DC4 ESC 3 3)
- Set Vertical Spacing 4 Lines/30mm (DC4 DC4 ESC 3 4)
- Set Vertical Spacing 6 Lines/30mm (DC4 DC4 ESC 3 6)
- Set Vertical Spacing 8 Lines/30mm (DC4 DC4 ESC 3 8)
- Eject Single Sheet or Form Feed (DC4 DC4 ESC 5)
- Set 15, 17.1, 20 CPI (DC4 DC4 ESC A)
- Load or Park Fanfold from a Rear Path (DC4 DC4 ESC N)
- Load or Park Fanfold from a Front Path (DC4 DC4 ESC T)
- Select Emulation (DC4 DC4 ESC Y)
- Select AFTA in Column (DC4 DC4 ESC Z)
- Select Resident Font (DC4 DC4 ESC g)
- Request to Read Configuration (DC4 DC4 ESC h)
- Printer Configuration Response (DC4 DC4 ESC h)
- Write Configuration Response (DC4 DC4 ESC i)
- Write Configuration Acknowledgement (DC4 DC4 ESC i)
- Select Print Quality (DC4 DC4 ESC p)
- Buffer Terminating Conditions
- Chapter 2. Epson FX-1050 Data Stream
- Print Job Processing
- Page Printing Concept
- Page Presentation
- One-Byte Controls
- Null (NUL)
- Bell (BEL)
- Backspace (BS)
- Horizontal Tab (HT)
- Line Feed (LF)
- Vertical Tab (VT)
- Form Feed (FF)
- Carriage Return (CR)
- Shift Out (SO) / Double-Wide Print
- Shift In (SI) / Condensed Print
- Device Control 1 (DC1) / Select
- Device Control 2 (DC2) / Cancel Condensed Print
- Device Control 3 (DC3) / Deselect
- Device Control 4 (DC4) / Cancel Double-Wide Print
- Cancel (CAN)
- Space (SP)
- Delete Character (DEL)
- Escape Sequence Controls
- Escape (ESC)
- Null (ESC NUL)
- Bell (ESC BEL)
- Backspace (ESC BS)
- Horizontal Tab (ESC HT)
- Line Feed (ESC LF)
- Vertical Tab (ESC VT)
- Form Feed (ESC FF)
- Carriage Return (ESC CR)
- Shift Out (ESC SO) / Double-Wide Print
- Shift In (ESC SI) / Condensed Print
- Device Control 1 (ESC DC1) / Select
- Device Control 2 (ESC DC2) / Cancel Condensed Print
- Device Control 3 (ESC DC3) / Deselect
- Device Control 4 (ESC DC4) / Cancel Double-Wide Print
- Cancel (ESC CAN)
- Set Intercharacter Spacing (ESC SP)
- Master Select (ESC !)
- Cancel MSB Control (ESC #)
- Set Absolute Print Position (ESC $)
- Select User-Defined Set (ESC %)
- Define User-Defined Characters (ESC &)
- Select Graphics Mode (ESC *)
- Auto Underscore (ESC –)
- Select Vertical Tab Channel (ESC /)
- Set 1/8 Inch Line Spacing (ESC 0)
- Set 7/72 Inch Line Spacing (ESC 1)
- Set 1/6 Inch Line Spacing (ESC 2)
- Set n/216 Inch Line Spacing (ESC 3)
- Select Italic Mode (ESC 4)
- Cancel Italic Mode (ESC 5)
- Printable Code Area Expansion (ESC 6)
- Cancel Printable Code Area Expansion (ESC 7)
- Copy ROM into Ram (ESC : NUL)
- Select Unidirectional Mode (one line only) (ESC <)
- Set MSB to 0 (ESC =)
- Set MSB to 1 (ESC >)
- Reassign Graphics Mode (ESC ?)
- Initialize Printer (ESC @)
- Select n/72 Inch Line Spacing (ESC A)
- Set Vertical Tabs (ESC B)
- Set Page Length (ESC C)
- Set Horizontal Tabs (ESC D)
- Begin Emphasized Print (ESC E)
- End Emphasized Print (ESC F)
- Begin Double-Strike Print (ESC G)
- End Double-Strike Print (ESC H)
- Printable Code Area Expansion (ESC I)
- Perform n/216 Inch Line Feed (ESC J)
- Select Single Density Graphics Mode (ESC K)
- Select Double Density Graphics Mode (ESC L)
- Select 12 CPI (ESC M)
- Begin Skip Perforation (ESC N)
- End Skip Perforation (ESC O)
- Select 10 CPI (ESC P)
- Select Right Margin (ESC Q)
- Select Character Set (ESC R)
- Begin Subscript/Superscript (ESC S)
- End Subscript/Superscript (ESC T)
- Set Print Direction (ESC U)
- Double-Wide Continuous Mode (ESC W)
- Dual Density Bit Image Graphics Type 2 (ESC Y)
- High Density Bit Image Graphics (ESC Z)
- Set Relative Position (ESC \)
- Set Letter Quality Justification (ESC a)
- Select Vertical Tabs in Channels (ESC b)
- Relative Move Right n/120 (ESC d)
- Relative Move Left n/120 (ESC e)
- Set 15 CPI (ESC g)
- Feed Paper n/216 Reverse (ESC j)
- Select NLQ Font (ESC k)
- Set Left Margin (ESC l)
- Turn Proportional Mode On/Off (ESC p)
- Quiet Printing (ESC s)
- Select Character Table (ESC t)
- Double High Printing (ESC w)
- Select NLQ or DP Print Quality (ESC x)
- 4247 Commands
- Select EAN-8 Bar Code (DC4 DC4 ESC ! NN 1 PP EM)
- Select EAN-13 Bar Code (DC4 DC4 ESC ! NN 2 PP EM)
- Select UPC-A Bar Code (DC4 DC4 ESC ! NN 3 PP EM)
- Select MSI Bar Code (DC4 DC4 ESC ! NN 4 PP EM)
- Select UPC-E Bar Code (DC4 DC4 ESC ! NN 5 PP EM)
- Select UPC 2-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 6 PP EM)
- Select UPC 5-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 7 PP EM)
- Select 2 of 5 INTERLEAVED Bar Code (DC4 DC4 ESC ! NN 17 PP EM)
- Select 2 of 5 INDUSTRIAL Bar Code (DC4 DC4 ESC ! NN 18 PP EM)
- Select 2 of 5 MATRIX Bar Code (DC4 DC4 ESC ! NN 19 PP EM)
- Select CODE 3 of 9 Bar Code (DC4 DC4 ESC ! NN 20 PP EM)
- Select CODABAR Bar Code (DC4 DC4 ESC ! NN 22 PP EM)
- Select CODE 128 Bar Code (DC4 DC4 ESC ! NN 23 PP EM)
- Select POSTNET Bar Code (DC4 DC4 ESC ! NN 24 PP EM)
- Print Bar Code Selection (DC4 DC4 ESC ( GS {N1} {DATA1} GS {N2} {DATA2} EM)
- Reinitialize Printer (DC4 DC4 ESC @)
- Set Vertical Spacing n/144 Inch (DC4 DC4 ESC 1 NN)
- Set Vertical Spacing 12 Lines/30mm (DC4 DC4 ESC 3 1)
- Set Vertical Spacing 3 Lines/30mm (DC4 DC4 ESC 3 3)
- Set Vertical Spacing 4 Lines/30mm (DC4 DC4 ESC 3 4)
- Set Vertical Spacing 6 Lines/30mm (DC4 DC4 ESC 3 6)
- Set Vertical Spacing 8 Lines/30mm (DC4 DC4 ESC 3 8)
- Eject Single Sheet or Form Feed (DC4 DC4 ESC 5)
- Set 15, 17.1, 20 CPI (DC4 DC4 ESC A)
- Load or Park Fanfold from a Rear Path (DC4 DC4 ESC N)
- Load or Park Fanfold from a Front Path (DC4 DC4 ESC T)
- Select Emulation (DC4 DC4 ESC Y)
- Select AFTA in Column (DC4 DC4 ESC Z)
- Select Resident Font (DC4 DC4 ESC g)
- Request to Read Configuration (DC4 DC4 ESC h)
- Printer Configuration Response (DC4 DC4 ESC h)
- Write Configuration Response (DC4 DC4 ESC i)
- Write Configuration Acknowledgement (DC4 DC4 ESC i)
- Select Print Quality
- Buffer Terminating Conditions
- Unsupported Command Processing
- Chapter 3. Intelligent Printer Data Stream
- Chapter 4. IPDS Programming Information
- IPDS Initialization Defaults
- Command Format
- Supported IPDS Command Codes for the 4247 Printer
- Command Function Sets
- Device Control Function Set Commands
- No Operation (NOP)
- Sense Type and Model (STM)
- Set Home State (SHS)
- Acknowledge Reply (ACK)
- Load Font Equivalence (LFE)
- Code Page ID Values
- Load Copy Control (LCC)
- Logical Page Descriptor (LPD)
- Logical Page Position (LPP)
- Deactivate Font (DF)
- End Page (EP)
- End (END)
- Execute Order Home State (XOH)
- Execute Order Any State (XOA)
- Text Function Set Commands
- Load Equivalence (LE)
- Write Text (WT)
- Set Inline Margin (SIM)
- Set Intercharacter Adjustment (SIA)
- Set Baseline Increment (SBI)
- Absolute Move Inline (AMI)
- Absolute Move Baseline (AMB)
- Relative Move Inline (RMI)
- Relative Move Baseline (RMB)
- Begin Line (BLN)
- Set Coded Font Local (SCFL)
- Set Text Orientation (STO)
- Begin Suppression (BSU)
- End Suppression (ESU)
- Draw I-Axis Rule (DIR)
- Draw B-Axis Rule (DBR)
- Repeat String (RPS)
- Transparent Data (TRN)
- No Operation (NOP)
- Set Variable Space Increment (SVI)
- Set Text Color (STC)
- Overstrike (OVS)
- Underscore (USC)
- Temporary Baseline Move (TBM)
- Image Function Set Commands
- Graphics Function Set Commands
- Drawing Order Coordinate System
- Graphic Medium Presentation Space
- Graphic Window
- Graphic Block Area
- Positioning the Graphic Window in the Graphic Block Area
- Write Graphics Control (WGC)
- Write Graphics (WG)
- Begin Segment Introducer (BSI)
- No Operation
- Comment
- Segment Characteristics
- Set Pattern Set
- Set Color
- Set Mix
- Set Background Mix
- Set Fractional Line Width
- Set Line Type
- Set Line Width
- Set Current Position
- Set Arc Parameters
- Set Extended Color
- Set Pattern Symbol
- Set Marker Symbol
- Set Character Cell Size
- Set Character Angle
- Set Character Set
- Set Character Precision
- Set Character Direction
- Set Marker Precision
- Set Marker Set
- End Prologue
- End Area
- Begin Area
- Line at Current Position
- Marker at Current Position
- Character String at Current Position
- Fillet at Current Position
- Full Arc at Current Position
- Begin Image at Current Position
- Image Data
- End Image
- Relative Line at Current Position
- Line
- Marker
- Character String
- Fillet
- Full Arc
- Begin Image
- Relative Line
- End (END)
- Related Drawing Orders
- Bar Code Function Set Commands
- Code 128 Character Set (EBCDIC)
- Overlay Function Set Commands
- Page Segment Function Set Commands
- Loaded Font Function Set Commands
- Chapter 5. IPDS Exception Reporting Codes
- Chapter 6. Print Samples and IPDS Coding Example
- Appendix A. Code Pages
- EBCDIC Code Pages
- USA/Canada/Canadian Bilingual
- Canadian French
- Austrian/German
- Belgian Old
- Brazilian
- Danish/Norwegian
- Finnish/Swedish
- Italian
- Japanese English
- Portuguese
- Spanish/Spanish Speaking
- English (UK)/Ireland
- Japanese Katakana
- French/French Azerty
- Arabic
- Greek (Old)
- Hebrew Bulletin
- International 5/Swiss/Belgian
- Greek/Latin (ISO 8859-7) + euro
- Korean
- Thai
- Latin 2/ROECE
- Icelandic
- Greek New + euro
- Cyrillic
- Yugoslav (Old)
- OCR-A
- OCR-B
- Latin 9 (ISO 8859) + euro
- Cyrillic Multilingual
- Latin-5 Turkey
- Farsi
- Baltic Multilingual
- Estonian
- USA/Canada + euro
- Austrian/German + euro
- Danish/Norwegian + euro
- Finnish/Swedish + euro
- Italian + euro
- Spanish/Spanish Speaking + euro
- English/UK + euro
- French + euro
- International 5/Belgian New + euro
- Icelandic + euro
- ASCII Code Pages
- USA (Personal Computer) A-54
- Greek (MS DOS)
- Greek/Latin (ISO 8859-7)
- Latin 1 (ISO 8859-1)
- PC Multilingual
- Old Greek
- Latin 2/ROECE
- Latin 3 (PC)
- Cyrillic (PC)
- Latin 5-Turkey + euro
- PC Multilingual + euro
- Portuguese
- Icelandic
- Hebrew
- Canadian French
- Arabic
- Danish/Norwegian
- PC Data, Cyrillic, Russian
- Greek New + euro
- Thai
- OCR-A
- OCR-B
- Latin 2 (ISO 8859-2)
- Latin 3 (ISO 8859-3)
- Latin 4 (ISO 8859-4)
- Cyrillic (ISO 8859-5)
- Latin 8 (ISO 8859-8)
- Latin 5 (ISO 8859-9)
- Baltic Multilingual
- Estonian
- Latin 9 (ISO 8859-15) + euro
- Urdu
- Arabic Extended
- Latin 6 (ISO 8859-6)
- Farsi (Personal Computer)
- Estonian (Personal Computer)
- Latvian (Personal Computer)
- Lithuanian (Personal Computer)
- Central Europe Latin 2
- Cyrillic Windows + euro
- Epson FX-series Code Pages
- EBCDIC Code Pages
- Appendix B. Application Paper Source Selection
- Appendix C. 4247 Bar Code and OCR Printing Options
- Appendix D. Configuration Menu Lockout
- Appendix E. Interfaces
- Appendix F. Network Interface Technical Reference
- 4247 Network Configuration Parameters
- Managing a Single Printer Configuration Using the 4247 Internal Webpage
- Managing Multiple Printers Using the 4247 Remote Printer Management Utility
- 4247 Network Interface Summary
- IBM systems - LAN printing technical support documents on the world-wide-web
- 32815, Configuring a *LAN 3812 SNMP Device Description
- 19934440, Recommended SNMP Port Number Values for *LAN 3812 SNMP Device Descriptions
- 8983237, Configuring a Remote Output Queue (RMTOUTQ)
- 18762910, Configuring a *LAN 3812 Device Description that Uses the LPR Print Driver (TSPLPRD) Exit Program
- IPDS Services Facility (PSF) printing
- Appendix G. LAN Interface MIB Support
- Appendix H. The Remote Printer Management Utility
- Notices