Compuprint 4247-Z03 Programmer Manual - Manual (Page 47)

HC LC Character Set
03 93 CP915 Cyrillic (ISO 8859-5)
03 94 CP916 Latin 8 (ISO 8859-8)
03 98 CP920 Latin 5 (ISO 8859-9)
03 99 CP921 Baltic Multilingual
03 9A CP922 Estonian
03 9B CP923 Latin 9 (ISO 8859-15)
03 EE CP1006 Urdu
04 16 CP1046 Arabic Extended
04 41 CP1089 Latin 6 (ISO 8859-6)
04 4A CP1098 Farsi (Personal Computer)
04 5C CP1116 Estonian (Personal Computer)
04 5D CP1117 Latvian (Personal Computer)
04 5E CP1118 Lithuanian (Personal Computer)
04 E2 CP1250 Central Europe Latin 2
04 E3 CP1251 Cyrillic Windows ® + euro
Note: The following languages are all supported within code page 850 (PC Multilingual):
Austrian/German Italian
Austrian/German (alternate) Japanese English
Belgian Spanish/Spanish speaking
Brazilian Spain (alternate)
Finnish/Swedish United Kingdom
Finnish/Swedish (alternate) U.S.A./Canada
French/French Azerty Yugoslav
Set Print Quality (SPQ) (ESC [ d)
1B 5B 54 04 00 00 00 HC LC
This control allows the host application to specify the desired print quality when the printer is in 4247 or
2381 emulation mode. The setting remains in effect until changed by another Set Print Quality control or
until the printer is initialized. Bit image graphics (ESC K, L, Y, and Z) are not affected. Highlighting modes,
such as italics, emphasized, and double wide remain active if they were active when the SPQ control was
activated.
QQ specifies the quality of subsequent printing. Valid values are X'00' to X'FE' as follows:
Hex Function
X'00' No change (Default)
X'01 - 3F' Low quality level (highest speed) See Note
X'40 - 7F' Medium quality level (medium speed)
X'80 - FE' High quality level (lowest speed)
X'FF' Printer Initialization (Default)
Chapter 1. Personal Printer Data Stream (PPDS) 27