Compuprint 4247-Z03 Programmer Manual - Manual (Page 227)

X'021E01' Invalid Text Control Length
Explanation: The length of a text control is not valid.
Alternate Exception Action: None.
X'021E02' Mismatch Between Font and XOA Print
Quality Control
Explanation:
1. The combination of parameters specified in LFE are
not supported together with the quality indicated by
XOA Print Quality Control.
2. The Font (Style) ID specified in the LFE is invalid or
unsupported or is not valid with the other font
parameters.
Alternate Exception Action: Choose “Best Fit” font.
Note: This error will be flagged when an attempt to
present the font is processed.
X'021F01' Repeat String Length Error
Explanation: Repeat String control on a Write Text
command has nonzero fill count but zero string length.
Alternate Exception Action: None.
X'021F02' Mismatch of LFE Two-Byte Loaded
Font ID Parameters
Explanation: Two fonts have been assigned the same
two-byte Loaded Font ID by the LFE command, but one
or more of the following attributes differ: Character Set
ID, Code Page ID, Font (Style) ID, Uniform Character
Increment, Proportional Increment Coefficient Table.
Alternate Exception Action: None.
X'022602' Invalid LSS X Box Size
Explanation: The Box X size, specified in Byte 6 of
the Load Symbol Set command, is not a valid or
supported value or is incompatible with the specified
font.
Alternate Exception Action: None.
X'022702' Invalid LSS Y Box Size
Explanation: The Box Y size, specified in Byte 7 of
the Load Symbol Set command, is not a valid or
supported value or is incompatible with the specified
font.
Alternate Exception Action: None.
X'022802' LSS Pattern Download Format
Reserved or Not Supported
Explanation: The specified pattern download format in
LSS is either a reserved value or not supported.
Alternate Exception Action: None.
X'022902' Invalid LSS Additional Parameter Byte
Length
Explanation: The additional parameter byte length
specified in the LSS command is outside the range
X'0D' through X'FF' or is not a supported value.
Alternate Exception Action: None.
X'023101' Invalid LCC Number of Copies
Explanation: The Number of Copies value specified
on the Load Copy Control command is not a valid or
supported value.
Alternate Exception Action: Proceed as though the
number of copies field stated 1.
X'023201' Invalid LCC Number of Copies
Explanation: There is an invalid or unsupported Load
Copy Control keyword in the group entry.
Alternate Exception Action: None.
X'023401' Invalid LCC Copy Group Byte Count
Explanation:
1. The number of bytes in Load Copy Control group is
not a multiple of two byte pairs.
2. The number of bytes in Load Copy Control group is
not a valid or supported value.
Alternate Exception Action: None.
X'023601' Invalid or Unsupported Load Copy
Control Simplex/Duplex Parameter
Explanation: The LCC command simplex/duplex
parameter is invalid or unsupported.
Alternate Exception Action: If invalid, none. If
unsupported, the printer prints simplex.
X'023A02' Maximum Number of Fonts Allowed by
the Printer Exceeded
Explanation: An attempt was made to download more
fonts than the printer can support.
Alternate Exception Action: None.
Chapter 5. IPDS Exception Reporting Codes 207