Compuprint 4247-Z03 Programmer Manual - Manual (Page 231)

X'029201' Overlay Number Not Loaded
Explanation: The overlay identified by the Overlay
Identifier on the Include Overlay, Deactivate Overlay or
LCC command was not loaded or was already deleted
prior to its attempted use.
Alternate Exception Action: None.
X'029202' Invalid Print Quality Control Parameter:
Explanation: The Print Quality Control parameter is
X'00', which is a reserved value.
Alternate Exception Action: None.
X'029301' Recursive Overlay Invocation:
Explanation: An infinite nesting loop has occurred
with the Include Overlay command (for example, an
overlay has included itself).
Alternate Exception Action: None.
X'029401' Recursive Overlay Invocation:
Explanation:
1. The Page Segment Identifier on the Include Page
Segment command is not a valid or supported
value.
2. The Page Segment Identifier on the Begin Page
Segment command is not a valid or supported
value.
Alternate Exception Action: None.
X'029501' Page Segment Number Already Loaded
Explanation: The host attempted to download a page
segment that already exists in the printer.
Alternate Exception Action: None.
X'029601' Page Segment Number Not Loaded
Explanation: The page segment identified by the
Page Segment Identifier on the Include Page Segment
or Deactivate Page Segment command was not loaded
or was already deleted prior to its attempted use.
Alternate Exception Action: None.
X'029701' Overlay Nesting Limit Exceeded
Explanation: Depth of overlay nesting is greater than
the maximum depth.
Alternate Exception Action: None.
X'029801' Suppression Number Outside Valid
Range
Explanation:
1. On a Write Text command, the Begin Suppression
number value is not a valid or supported value.
2. In a LCC command, the suppression number value
is not a valid or supported value.
Alternate Exception Action:
1. Ignore the control sequence.
2. None.
X'029803' Temporary Baseline Move Error
Explanation:
1. The temporary baseline increment is not a valid or
supported value.
2. The temporary baseline move direction is not a valid
or supported value.
3. The temporary baseline move precision is not a
valid or supported value.
4. Unsupported multiple offset temporary baseline
move.
5. Unable to support temporary baseline move by
printing full size characters.
Alternate Exception Action:
1. None for reasons 1 through 4.
2. For reason 5, present according to the substitution
method.
X'02A401' Logical-page boundary in the
X-direction cannot be represented
Explanation: In either the page or page overlay, the
sum of the logical page origin and the logical page size
in the X direction exceeds the maximum supported.
Alternate Exception Action: None.
X'02A501' Logical-page boundary in the
Y-direction cannot be represented
Explanation: In either the page or page overlay, the
sum of the logical page origin and the logical page size
in the Y direction exceeds the maximum supported.
Alternate Exception Action: None.
X'02AC01' Insufficient Storage to Print the Sheet
Explanation: Page is too large for main storage.
Alternate Exception Action: None.
Chapter 5. IPDS Exception Reporting Codes 211