Compuprint 4247-Z03 Programmer Manual - Manual (Page 56)

Load or Park Fanfold from a Front Path (DC4 DC4 ESC T)
14 14 1B 54 NN
This command loads or performs the Park function for fanfold paper fed from the front path.
The values for NN are:
0
The printer selects the front path. If fanfold paper is already loaded in a paper path that is not
requested, the printer automatically performs the Park function before loading the front path. The
printer will then load the fanfold paper once data is received. For more information on the Park
function, see “PARK/PATH” in “Chapter 2. Understanding the Operator Panel” in the User's Guide
for your printer.
1 The printer performs the Park function for forms in the front path.
Select Emulation (DC4 DC4 ESC Y)
14 14 1B 59 NN
This command selects the printer emulation mode.
The values for NN are:
1
Epson FX 1050
2 4202 Proprinter III XL
5 4247 or 2381 Personal Printer
Select AFTA in Column (DC4 DC4 ESC Z)
14 14 1B 5A NN
This command selects the column at 10 CPI where the Automatic Forms Thickness Adjustment (AFTA) will
be made.
The value for NN is the column number.
Select Resident Font (DC4 DC4 ESC g)
14 14 1B 67 NN
This command selects the resident font based on the following values of NN:
0
Courier
1 Gothic
128 OCR-B
129 OCR-A
Request to Read Configuration (DC4 DC4 ESC h)
14 14 1B 68
This command requests the printer to send its configuration saved in non-volatile memory (NVM).
The printer must be configured for 1284 Parallel mode.
36 Programmer Manual