AMETEK CTS 3.0 User Manual
Page 93
User Manual
Compliance Test System 3.0
89
3. From the File menu, select the Open Data File entry, This brings up the standard file open
dialog box.
4. Locate and select the file to be replayed. Harmonics files start with the letter H, flicker files
start with the letter F.
5. Click on the Open button to open the test data file. This will bring up the standard setup
screen showing the settings that were used to acquire this data.
6. Click on OK to proceed to the main test window.
7. To start the replay process, click on the Start button. The data displayed will be taken from
the stored data files.
8. The buffer rate and speed at which data is replayed can be controlled using the various
settings in the Options menu. This may be required to adjust to the speed of the PC used.
9. The replay process can be halted at any time by clicking on the Stop button. This will stop the
data at the buffer number shown in the lower left corner.
10. Once stopped, the data can be stepped forward or backward at various rates using the VCR
style buttons in the lower left corner.
11. A test report can be printed from stored data in this mode. The actual date and time the data
was recorded will be shown on the report in addition the report print date and time.