AMETEK CTS 3.0 - Manual (Page 104)

Compliance Test System 3.0 User Manual
100
Parameter Description
distortion pre-test and displays the result in the Voltage THD Tab.
Source Regulation: When checked, the test program will checked the AC
Source output voltage regulation with the EUT connected to ensure the AC
source meets the test standard requirements.
User Data The fields at the bottom of the Tab may be used to enter information on the
person or entity performing the test, the EUT and any other comments that may
be relevant. This information will be incorporated in the test report.
User selected EUT Class, test steps, options and nominal values are all included on the IEC
61000-4-13 test reports.