AMETEK CTS 3.0 - Manual (Page 31)

User Manual Compliance Test System 3.0
27
2.14 References
Additional information on IEC norms and requirements may be obtained from the following
sources. You may also check for the latest IEC related information on California Instruments' web
site at www.calinst.com.
Document Number Date of
Publ. Title
IEC 725 (1981) “Considerations on reference impedances for use in
determining the disturbance characteristics of household
appliances and similar electrical equipment.”
IEC 868 (1986) “Flicker meter, Functional and design specifications.”
IEC 868 Amendment 1 (1990) “Flicker meter, Functional and design specifications.”
IEC 868-0 (1991) “Part 0: Evaluation of flicker severity.”
IEC 61000-3-2 (1995) “Part 3: Limits - Section 2: Limits for harmonic current
emissions (equipment input current <
16 A per phase.)”
IEC 61000-3-3 (1994) “Part 3: Limits - Section 3: Limitation of voltage fluctuations
and flicker in low-voltage supply systems for equipment with
rated current <
16 A.”
IEC 61000-4-7 1996 “General guide on harmonics & inter-harmonics” New
version expect early 2002.
Copies of complete IEC standards
may be obtained from at:
International Electrotechnical Commission (IEC)
P.O. Box 131
1211 Geneva 20
Switzerland
Phone: +41 22 919 0300
Fax: +41 22 919 0228
Web: www.iec.ch
or in the USA:
American National Standards Institute (ANSI)
Sales Department
11 West 42nd Street
New York, NY 10036
Phone: +212 642 4900
Fax: +212 302 1286