AMETEK CTS 3.0 - Manual (Page 30)

Compliance Test System 3.0 User Manual
26
2.12 IEC 61000-4-28 Voltage Frequency Variations
The CTS system supports full compliance IEC 61000-4-28 testing (iX Series based CTS systems
only). The IEC 61000-4-28 test is implemented in the CIGui32 OR CIGuiSII Windows software.
To accommodate changes in the specification, test levels and duration can be changed by the
operator or loaded from disk if needed. Non iX Series based CTS systems offer pre-compliance
testing of IEC 61000-4-28 only.
2.13 IEC 61000-4-29p DC Voltage Dips, Interruptions and Variations
The CTS system supports pre-compliance IEC 61000-4-29 testing (iX Series based CTS systems
only). The IEC 61000-4-29 test is implemented in the CIGui32 or CIGuiSII Windows software.
To accommodate changes in the specification, test levels and duration can be changed by the
operator or loaded from disk if needed. Non iX Series based CTS systems do not support testing
to IEC 61000-4-29.