AMETEK CTS 3.0 - Manual (Page 110)

Compliance Test System 3.0 User Manual
106
9. IEC 61000-4-14 Voltage Fluctuations Immunity Testing
9.1 About This Chapter
This chapters covers testing a device for compliance with the IEC 61000-4-14 Voltage
Fluctuations test standard. This test is supported through the CIGUI AC source control program. If
you purchased a 100-CTS or 300-CTS test system, which does not include a California
Instruments AC source, you will not be able to perform these tests.
The IEC 61000-4-14 implementation in the CIGUI32 or CIGuiSII is based on the IEC 61000-4-14
standard dated 1999-02 and Amendment 1 dated 2001-07. Test levels and times can be
changed if needed through the use of one or more filename.414_Fluc files in the IEC_Test
directory.
Figure 9-1: IEC 61000-4-14 Test Window