AMETEK CTS 3.0 - Manual (Page 85)

User Manual Compliance Test System 3.0
81
Menu Item Description
Every failed/distorted
Window Only acquisition windows with one or more failures are
shown.
Every Failed Source
Window Only acquisition windows with high AC source
distortion are shown.
Every Failed Current
Window Only
Recall Size Amount of acquisition buffers or windows to be loaded from disk to memory during
playback. The more windows are loaded, the further the user can back up in the
data stream during playback. Thus, when selecting 100 buffers, the replay can be
stopped and reversed up to 100 buffers.
The recall size ranges from 0 to 1000 buffers.
Replay Delay Selects the time to wait between display data buffers during replay mode. On a
fast PC, it may be useful to increase this time or the replay will run by too fast to
see anything meaningful.
Available delay times between buffers are 0.0 seconds for the fastest speed to 5.0
seconds for the slowest speed. During delay, you can click on the pause button to
pause.
Display Rate This setting determines how many buffers are skipped for display purposes. While
all data buffers are read from disk, only the selected buffer interval set here is
displayed in the graphs.
Available rates range from Every Acquisition to All the way to the End. The last
setting means the data is read from disk all at once and the last buffer is displayed
right away. The user can then back up using the VCR style keys in the lower left
corner of the screen.
Table 5-3 : IEC Harmonics Replay Settings